HOME
PROFILE
PRODUCTS

- Fire Extinguisher
- Fire Blankets
- Hose Reels
- Signage
- Pumps
- Cabinets & Covers
- Smoke Detectors
- Fire Alarms
- Vehicle Brackets
- Intumescent Coatings
LINKS
EXTINGUISHER GUIDE
CONTACT US

Jacking Pump


Being a "volumetric water pump", the FlameStopNQ Fire Jacking Pump is able to offer high pressures in relation to comparatively low powers and which have particularly steady operating curves.
The FlameStop Jacking Pump is also qualified in domestic fittings to increase the system pressure in aqueducts and for automatic water distribution by small autoclave tanks or by hydrosphere units.
Two-pole induction motor at 0.75kW
Cast Iron motor and body
Continuous Duty
Complete with 2 metre lead and plug

Product Code:   HJP01

Automatic Jacking Pump System


We now offer a complete Automatic Jacking Pump system. Able to pump water up to 9 metres, the Automatic Jacking Pump is also available in individual components as listed below:

* HJP01 - Jacking Pump 0.75kW
* HPC8001 - Jacking Pump T Piece
* HPC8002 - Jacking Pump Gauge
* HPC8003 - Jacking Pump Check Valve
* HPC8004 - 8.0 Litre Pressure Chamber
* HPC8005 - XMP Pressure Switch

Product Code:   HJP01Auto

8.0 Litre Pressure Chamber


8.0 Litre Pressure Chamber to suit our Automatic Jacking Pump system.

Product Code:   HPC8004

Jacking Pump Check Valve


Check valve to suit our Automatic Jacking Pump system.

Product Code:   HPC8003

Jacking Pump Gauge


Gauge to suit NQ Fire Automatic Jacking Pump system.

Product Code:   HPC8002

Jacking Pump T Piece


T Piece to suit Automatic Jacking Pump system.

Product Code:   HPC8001

XMP Pressure Switch


XMP Pressure Switch to suit our Automatic Jacking Pump system.

Product Code:   HPC8005
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
North Queensland NQ Fire Protection. Cairns fire extinguishers fire blankets smoke detectors smoke alarms fire hose reels fire extinguisher cabinets intumescent paints coatings fire pumps fire hydrant fire signs car vehicle fire extinguisher brackets
Web Site designed, hosted & maintained by Allcorp Advertising ©
2010

North Queensland Fire Protection is an independent fire protection company that can act as a consultant in many aspects of fire and safety relating to marine suppression and detection systems delivering foam,
dry chemical, FM 200, carbon dioxide, halon and salt water mist extinguishers. We also design and install fire detection systems for buildings commercial and industrial to meet Australian Standards and the
Building Code of Australia BSA. Our service department attends to all portable extinguishers that can be pressure tested and refilled when required on site or in our extinguishers workshop, with hose reels and hydrants
tested are inspected on site. Staff fire training is also available on request of safety officer's requirements. North Queensland Fire Protection is also Australian and New Zealand distributor for Nofire Technologies manufactures
of Intumescent coatings and fire retardant paint, these intumescent non toxic water based coatings can be applied to plasterboard, weather boards, cement sheeting and many other building materials by airless spray gun
brush or roller. Nofire intumescent paint may require a primer if applied to steel columns or beams. Fire retardant coatings require to be a certain micron thickness to achieve the best passive fire protection result. Passive fire
protection or intumescent coatings and paint if correctly applied will eliminate flashover and generates no flame spread, zero smoke development and zero toxicity. Staff training is available to paint contractors wishing to apply
passive fire intumescent paint and coatings.